I am dealing with an action in a Huntington grand that has been a challenge to regulate . I am focused on the whippens as the source of the problems and have rebushed the rep lever as well as the felt on the jack. There is only a piece of action cloth 3mm thick on the whippen heel . It is glued to the heel along the entire heel with no underfelt. This cloth is about 3mm thick . In trying to get the blow adjusted I have to turn the capstans way up. Would adding more cloth and some undercloth/bushing cloth help or would it be better to change the height of the rail. I know it might take a bit of trial and error and tweaking the action spread with shims . Almost every whippen picture I have looked at in the catalogs shows heels with underfelt. The heel on this whippen is all part of the whippen-there is no glue joint. Eventually this brand was taken over by the Sterling company and I can not find any published regulation specs. most everything I have done so far is trial and error . Previous work was done on the action such as key rebushing, balance rail keypins, key punching replacement.
------------------------------
James Kelly
Pawleys Island SC
843-325-4357
------------------------------