All Classes

63rd Annual PTG Convention & Technical Institute • August 4 - 7, 2021 • Orlando, FL


(I,A) Express Prep & Voicing

Paul Rea, Vienna International

Want to know how to achieve great and lasting results in the preparation, regulation and voicing of grand pianos?  Find out how to give your client the most bang for the buck while making the most of your time and expanding your income potential.

(I,A) Find Your Number - Aftertouch on the Upright Piano

Keith Bowman, RPT & Mike Carraher, RPT Vienna/Hailun

Consistent aftertouch is the best way to achieve a smooth, even touch. Where do we start? Review action geometry - the relationships between moving parts. Apply diagnostic procedures to determine condition and use that information to get the best out of each piano action. Find out what your aftertouch number is! Dampers, make accurate spoon adjustments in and out of the piano, set properly tensioned damper springs, diagnose damper tension from front-of-key, and more!

(I,A) Ghosting Let-off / Focusing Tone

Dave Conte, RPT, Knoxville, TN Chapter

We’ll explore the relationship of the string and hammer while in motion, and how to use it to maximize performance and for troubleshooting. You’ll have a hands-on opportunity if time allows after discussion and demonstration.

(E) Grand Action Regulation the Mason & Hamlin Way

Bruce Clark, Mason & Hamlin

A structured, rigorous method of regulating a grand piano is useful for all technicians. While this is the Mason & Hamlin way, the methods and processes will be useful on all grand pianos.

(I,A) Grand Regulation Actionpalooza

Rick Baldassin, RPT, Renner USA & Carl Teel, Salt Lake City, UT Chapter

Rebuilding a piano action and making it work properly doesn’t have to be hard. This class will give you the knowledge and confidence to do the job right. By quickly identifying the most significant variables, you’ll spend your time and energy on what matters most. Rick and Carl will focus on many operations necessary to make the action function properly. Most are not part of regulation. Action geometry will be covered in a straightforward manner. You will understand the importance of proper part selection and the contribution of each part to the system. Effects of friction on action weight and performance, and the trade-off between action weight and inertia will be covered. Limit 16 students. Pre-registration required. Fee: $60. Materials and tools will only be provided for 16 participants, but observers are welcome.

(E) Regulating: A Part of Everyday Service

Ryan Sowers, RPT, Puget Sound, WA Chapter

Often regulating is sold as a line item. It should be part of the ongoing service of everyday pianos. 10-15-hour regulations are often impractical and unnecessary. This class will inspire you to make regulating a part of your service routine as you boost your reputation, your income, and your clients’ piano playing experience.

(E) Relentless Repetition, Relentless Repetition, Relent.......

Mike Reiter, RPT, Eugene, OR

This class will aid in the improvement of rapidly repeating notes on grand actions using normal regulation methods. We will take time to explore the ins and outs of some of the finer points of regulation and where the action loses the ability to reset before the key returns to the rest point.

(E) Servicing Acoustic Piano Actions in Digital Pianos

David Reed, RPT, Kawai

The piano world is changing, folks! There are Acoustic / Digital hybrid piano models being sold now that have standard acoustic piano actions in them, giving the pianist the touch response of an acoustic piano with the benefits a digital piano. This is a new market for us to take advantage of with only minimal learning, and as these hybrid digitals become more common and start to age, they will need us to maintain them. This class will give an overview of Kawai’s hybrid models, and practical advice to make it easier to work with these pianos.

(E) You Don't Know Jack

Nathan Mills, RPT, Augusta, GA Chapter

This class will demystify the concept of double escapement and demonstrate a simple method for setting simultaneous double escapement consistently when regulating grand actions. We will finish up with hands-on practice.


(E) Cloud-Based Client Management

Terry Miller, RPT, Sacramento, CA Chapter

Learn how to use free Google apps, wherever you are, to control and grow your repeat "best customer" business. Topics covered will include Part 1: The service call - from paper invoice to client and service history detail entries, establishing the next appointment, confirming with a thank you, billing and A/R help, and Part 2: Admin and marketing, using Gmail as a getting-things-done tool, controlling your email. calendar calculus. answering FAQs quickly, sending targeted bulk emails and IRS issues. An "Apps Use Matrix" will be handed out at the end of the class.

(E) Dealing with Difficult Customers

Tim Barnes, RPT, Gazelle Network & Torger Baland, RPT, Twin Cities, MN Chapter

Develop a playbook for how to turn difficult situations into positive reviews. We will discuss how to diffuse tough situations, handle different personality types. and respond to negative online reviews.

(E) How to Write an Effective Newsletter

Kestrel Curro, RPT, Southeastern Pennsylvania Chapter

We will focus on writing an effective newsletter for your clients. We will cover letter structure and how to keep it engaging. Basic writing style will be addressed and will also cover common issues. I will offer topic ideas and how to find new topics. Most importantly, we will discuss the benefits of an effective newsletter.

(E) Learn to Play All Major Scales in 90 Minutes 

Ingrid Kraft, RPT, Portland, OR Chapter & Morgan Cowell, RPT, Nebraska Chapter

Class attendees will learn to play all major scales by building tetrachord patterns of whole steps and half steps with each hand. We will cover whole steps, half steps, major scale patterns, tetrachords and circle of fifths. More experienced players may also learn an accompaniment that will be used as we play through all 12 of the major scales as a group. Limit: 15 spots will be able to participate in the hands-on portion. Contact Ingrid Kraft at to reserve a spot. Observers welcome.

(E) Learn to Play Piano in 90 Minutes 

Ingrid Kraft, RPT, Portland, OR Chapter & Morgan Cowell, RPT, Nebraska Chapter

Attendees will learn to play the piano using the pentatonic scale (with an added blues scale note). We will learn an accompanying bass line and explore basic improv patterns and rhythms. By the end of the class we will be taking turns at our own solos. Students will go home with all they need to develop their technique and style and show off their tunings with new flair. Limit: 15 spots will be able to participate in the hands-on portion. Contact Ingrid Kraft at to reserve a spot. Observers welcome.

(E) Selling and/or Buying a Piano Service Business

Wim Blees, RPT, Hawaii Chapter

You’ve spent a lot of time building your tuning business, or maybe you're in the market to buy an existing tuning business. Find out how to figure out how much the business is worth, the tax consequences, and the details involved in making the transaction.

(E) Selling Your Service on Amazon

Tim Barnes, RPT, Gazelle Network & Chris LaBarre, Connecticut Chapter

“Hey Alexa, I need to get the piano tuned.” Alexa: “Last time you purchased this item from XYZ Piano Tuning Service. Do you want to purchase that again?” These days you can buy everything on Amazon, including purchasing Local Piano Tuning Services. If you haven't already started receiving calls from ad agencies offering to set up your "Alexa enabled" accounts, you will.

(E) Tired? Come Be Inspired

Matt Hirschfelder, Portland, OR Chapter

Piano technicians are not an island. We work consistently with organizations who also desire to inspire musicians to a higher standard. Come learn more than you ever knew about the organizations, memberships, and foundations who interact with us on a regular basis. Hear anecdotes and hardship stories of the people who love the piano. You will be pleasantly surprised who has your back!

(E) Up Your Income in a Down Industry

Ed Tomlinson, RPT, Los Angeles, CA Chapter

The class is full of ways to increase your income by attracting more customers, selling more accessories, and selling more work. Hear from an industry veteran who has worked in service and sales and has owned a full line music store with pianos and keyboards for the last two decades. If you simply tune the piano and go to the next appointment, then this class is for you.

(E) Women's Forum On Piano Technology

Women working in the field of piano technology are invited to come share and support one another through discussion of our common profession and experiences. We have challenges and we have advantages, and it's great to discuss both with veterans and newcomers alike in a round-table format.

(E) Your Business - A Structural Analysis

John Gallen, Connecticut Chapter

There are various options for your business structure: Sole Proprietorship, LLC, Partnership, S or C Corp, etc. We will discuss the pros and cons, including the tax benefits, of each type. Whether starting out or considering a change, this class is for you. 

  College & University Technicians (CAUT)

(E) Harpsichord Basics for Piano Technicians

Jason Cassel, RPT, Salt Lake City, UT Chapter

This two-period hands-on class covers the basics of harpsichord technology – from hanging jacks to replacing a broken plectrum or string, and more. Videos will be shown demonstrating each repair and participants will have the opportunity to perform these repairs on their own.

(E) Before Equal Temperament Reigned

Jason Cassel, RPT, Salt Lake City, UT Chapter

Have you ever wondered why anyone would request anything other than equal temperament? This class provides a survey of keyboard temperament history from the Middle Ages to today. Recordings will be played, including side-by-side comparisons of musical excerpts performed in equal temperament and historic tunings, as well as aural demonstrations of beating, the syntonic comma, wolf intervals, and examples of key coloration. 


(E) The Period Piano Collection

Bill Shull, RPT, Pomona Valley, CA Chapter

The Period Piano Collection consists of instruments from the 1790s to the early 20th century. It includes pianos with unique or important design elements, pianos ideal for period performance, squares, diagonals, obliquely strung, Viennese, Brown actions, and transposing keyboards. Bill will discuss the designs and the music they represent.

(E) Reverse Design

Matt Hirschfelder, Portland, OR Chapter

The discerning piano technician will appreciate the detail and best practices for piano salvaging up-cycling, dismantling, and respecting legacy. Come dive into the design and quirks of the formerly functional piano removed from your customer’s house. Emphasis taken from a book by Campbell and Mason. This is an apprentice-must class.

(E) Sébastien Érard, Piano Genius

Fred Sturm, RPT, New Mexico Chapter

Érard was a seminal figure in the development of the piano, responsible for far more than just the agraffe and the repetition action we mostly remember him for. We’ll look at his inventive explorations, his role in establishing organized piano manufacture, and his very interesting career in both France and England. Special attention will be given to his ingenuity, to the details and why they matter.


(E) Building a 12-Week Apprenticeship Training Program

Tim Barnes, RPT, Gazelle Network

The best piano technicians of the future don't yet know that piano technology is a fulfilling and viable career. Training a new apprentice can and should take far less time than it does today. And, as a community of piano technicians, we need to think differently about how to solve this problem.

(E) Chapter Leader Forum

John Parham, RPT, Charlotte, NC Chapter

This is a round table discussion with chapter leaders (current or past) who have struggles and successes with running a chapter. Learn more about the recent Chapter Profile results. Bring your ideas and your challenges to share!


(I) PianoDisc Prodigy

Mark Burgett, PianoDisc

The next generation of PianoDisc is here. It’s Bluetooth-ready with a new app for the next generation and cloud storage. Incredible expandability all in one invisible package. Meet the challenge with this class, download the app and learn all the setup features. Includes some hands-on training.

(E) QRS Music Technologies: Discover the Legend Discover the Profit

Lori Clutter, QRS

QRS Music Technologies continues to innovate! Increase your profits with a variety of exciting new products that can be included on your next tuning or service call. QRS goes over some of its newest PNOmation additions and how to install them. It features the latest OT (Over the Top) player system, music, and ground-breaking control hardware.


(I) Collaboration in Action Rebuilding

Gary Telleen, RPT, Wichita, KS Chapter, John Gallen, Connecticut Chapter & Melanie Brooks, Brooks, Ltd.

Independent technicians have a portfolio of quality parts and services available on the market to produce a high-end action rebuild, but parts selection can be confusing. How do we determine what is right for us as technicians while meeting the needs of the pianist, the piano, and the platform in which it is played? Join us in a collaborative discussion between technician and supplier that will give you the confidence to determine what to use on your next action rebuild.

(E) European-style Grand Pinblock Replacement

Christian Bolduc, Pianos Bolduc

Replacing the pinblock in a grand piano can be quite awkward when a solid piece is inlaid in the structure on both sides of the case. Christian will show how to handle a Bechstein grand piano pinblock, demonstrating both the removal and installation procedures necessary for a perfect fit.

(I,A) Grand Action Rebuilding - Making the Right Choices

Rick Baldassin, RPT, Renner USA & Carl Teel, Salt Lake City, UT Chapter

In this half-day class, Rick and Carl's three Stations of Application will guide the action rebuilder in making the right choices for a successful, no-surprises job. Beginning with Station 1, the “Drawing Board”, measurements and geometry kick things off. In Station 2, “Mock-up”, critical choices are tried out before committing wholesale. Station 3, “Workbench”, focuses mainly on efficient key weigh-off (no guessing!).

(I,A) Grand Balancing Act 2.0 - Action Weigh Simplified

Bruce Stevens, RPT, South Bay, CA Chapter & David Vanderlip, RPT, Orange County, CA Chapter

How many technicians approach the weigh-off of a grand action with fear and trepidation because there is not a clear definition of proper down-weight vs. up-weight? Join Bruce and David as they demystify this subject with an innovative, quick, and easy method using Balance Weight protocols that greatly speeds up the weigh-off procedure and provides consistent results. Other considerations of fine grand action work such as geometry, action ratio, inertia, pattern key leading, parts selection and hammer preparation will also be covered in the 2nd period of the class. If you have been apprehensive about any of this work, you should gain confidence after attending this class.

(E) Installation of the Full-Fitted Pinblock

Christian Bolduc, Pianos Bolduc

Watch as Christian demonstrates from A to Z how to replace a full-fitted grand pinblock. Learn how to take necessary references before removing the plate, the use of the Plate-Puller, removing the pinblock using the Bolduc’s pinblock extractor, fitting the new block to the plate, drilling it, and gluing and dowelling in the case. You’ll hear many tips and tricks to simplify the work.

(I,A) Installing the WNG Grand Damper Action

Bruce Stevens, RPT, South Bay, CA Chapter

Replacement of the old grand damper action is too often overlooked, avoided, and/or feared, and yet it is a major component of any complete grand restoration.  In this two-period class, Bruce Stevens will share his experience as to why the WNG Damper Action is an excellent choice when it comes to a new back action installation.  Bruce will explain the tool kit WNG created to aid a precise installation, selecting the features of the new system required for the piano you are working on, and ordering the right action kit.  He will also cover the layout and assembly process and how the custom installation is easily accomplished.

(E) Keyboard Evaluation and Replacement for the Rebuilder

Dean Reyburn, RPT & Aaron Reyburn, Reyburn Pianoworks

We'll demonstrate practical and objective ways to make sure your action rebuild will be successful by checking the condition of the keyboard and measuring key ratio. Learn about the ramifications of installing a new keyboard and/or action stack. See a virtual tour through Reyburn Pianoworks keyboard manufacturing shop which using the latest CAD and CNC robotics.

(I,A) Rebuilder's Grab Bag, The Action Edition

David Hughes, RPT, Baltimore, MD Chapter 

This class will discuss the merits of installing new keys, new capstans and backchecks, keyboard weigh-off, action stack build-up, hammer weight management, damper system installation tips, trap-work goodies, and more. This will be 90 minutes of fast paced fun. Belly hounds need not apply – this class is where the action is.

(E) Upright Hammer Replacement

John Gallen, Connecticut Chapter

Upright hammer replacement is often needed, but installing the hammers is neither difficult nor easy and it is seldom taught. Using simple jigs, let's discuss the common issues and solutions found when performing this job.

(I,A) Vintage Steinway Restoration: Best Practices

Bill Shull, RPT, Pomona Valley, CA Chapter

The restoration of a vintage Steinway piano is discussed from the viewpoint of "Best Practices." The disciplines of conservation, traditional restoration, and remanufacturing are brought to bear on the restoration challenges presented by an 1870s Steinway grand. In the first period, these resources are reviewed, and the case studies are introduced. In the second period, the case studies are examined in detail, through these different lenses.


(E) Complete Piano Service: Optimizing the Piano, Your Client and Your Career

David Andersen, Los Angeles, CA Chapter & Eric Johnson, RPT, Connecticut Chapter

Two experienced professionals, one West Coast and one East Coast, will share their complementary approaches to the concept of complete piano service. You’ll hear lots of tips and techniques for getting the very best out of pianos and clients, ultimately leading to a rewarding and fulfilling career for you. This class is covered in two 90-minute sessions.

(I) Comprehensive Piano Appraisals

Mike Ello, RPT, Houston, TX Chapter

As professional piano technicians, we can provide a comprehensive piano appraisal that will meet the requirements necessary for insurance coverage, estate settlement, or the fair market donation value on IRS form 8283. Mike will share how he develops his 3 to 4 part comprehensive appraisal report.

(E) Creating and Using Specialty Kits for Different Repairs and Tasks

Isaac Sadigursky, RPT, Los Angeles, CA Chapter

View a visual presentation of many of the tool kits Isaac has created to do specific jobs in the shortest amount of time. Some kits are carried in his van (Isaac’s shop-on-wheels) and some are kept in the shop for specific jobs. Don’t miss this opportunity to hear Isaac share his experiences in performing daily field services more efficiently.

(E) Dampers from the Ground Up

Steve Brady, RPT, Seattle, WA Chapter

We’ll cover the important but often-misunderstood topic of damper regulation, including the installation of new damper felts, proper regulation of the damper pedal and the sostenuto pedal, and finally how to troubleshoot and correct damping problems in both grands and verticals.

(E) Fantastic Problems and How to Solve Them

Jason Cassel, RPT, Salt Lake City, UT Chapter

“I’ll take sticking keys for 300!” This Jeopardy-style course presents videos of common problems and repairs – from sticking keys to ringing dampers and beyond. Participants will be given a chance to score points by guessing the source of the problem correctly. Once identified, the solution to each problem will be discussed.

(E) Fantastic Squeaks and Where to Find Them

Jason Cassel, RPT, Salt Lake City, UT Chapter

“I’ll take pedal squeaks for 200!” This Jeopardy-style class features videos of clicks, buzzes, squeaks, and more. Participants will be given the chance to earn points by guessing the source of the sound correctly. When the source has been identified, the solution will be discussed.

(I) Fix That Lyre

Debbie Cyr, RPT, Boston, MA Chapter

General grand lyre repairs, featuring proper repairs for unglued lyre posts, all kinds of pedal mechanisms, and a demonstration of just how easy installing a Steinway lyre really is!!

(E) Fixing Spinets

Alice Alviani, North Shore, IL Chapter & Bruce Dornfeld, RPT, North Shore, IL Chapter

There are many spinets out there, and many good reasons to know how to service them. Spinets generally are more unfamiliar than unfixable. Let's remove the mystery with many practical "how-to’s" to cover a common topic that is rarely addressed. This is an expanded version of last year's class.

(B,I) Improving Upright Performance, 20 Tips

Starr Taylor, RPT, Southwest Florida Chapter

This beginner/intermediate class is designed to help technicians look at the whole piano system. If you know what to look for, you'll be seen as a professional. The tips in this class will help you quickly diagnose problems and fix them. Topics include tuning instability, bedding actions, ironing key bushings, fixing damper rod problems and addressing pedal issues. A detailed handout is included. Questions are always encouraged!

(E) Klunker Klinic

Jim Geiger, RPT, Heart of Texas Chapter

The Klunker Klinic class will take an old neglected piano and try to make it playable. The assessment part of the class will determine and explain the repairs to be done, but other issues will be covered like how to handle the brute, whipping the bass strings, and when to say NO!!!

(E) Piano Technicians Playground

Bill Davis, RPT, Sheffey Gregory, RPT & John Parham, RPT

This one-day class allows individuals to watch video instruction in English or Español at multiple workstations then perform specific skills in an environment promoting success. Participants must download or stream videos to their own device from the in-class Wi-Fi. All tasks are presented in a step-by-step manner. Whether you have 30 years under your belt or just beginning, this hands-on class offers a best-practice opportunity to explore, practice, improve and polish core competencies and skills. Tools and materials are provided. Master your craft. Earbuds recommended.

(E) Re-attaching the Grand Pedal Lyre with T-nuts and Modifying Pitman Holes

Isaac Sadigursky, RPT, Los Angeles, CA Chapter

This method of modifying Grand Pedal lyre mounting was shown by the late legendary Los Angeles tuner Norman Neblett. Isaac has utilized it in his daily work and rescued many institutional pianos suffering from abuse and neglect. You’ll see a demonstration of this simple repair using Isaac’s kit of tools and drills to perform the task in less than 1/2 hour. The second part of the class will deal with modifying the Pitman Hole by enlarging it, so the Pitman does not make squeaks and other annoying sounds.

(E) Repair and Touch Up for Lacquer Pianos

Mike Ello, RPT, Houston, TX Chapter

Learn both simple and complex touch up methods to lacquer finished pianos. We will cover edge repair, shellac burn ins, hard wax melt ins, color matching, graining, gouge repairs, and partial part refinishing. Mike is the author of the book "Master Guide to Piano Finish Touch Up.”

(E) Street Pianos - Not Just a Pretty Case

Gina Bonfietti, Connecticut Chapter & Amy Tiernan, RPT, Connecticut Chapter

There is so much more to a street piano than just a pretty case! Learn how to prep the piano, find a location, deal with your municipality, and how to promote your piano. We will discuss issues that we had with our street piano and the stories it generated. This class will teach you the why, the how and the must dos for a successful street piano.

(B) String Replacement

Jim Geiger, RPT, Heart of Texas Chapter

First, do no harm. This class will show the safe procedures for replacing both treble and bass strings, including tools supplies and suppliers, measurements and formulas, how to and how not to, and how to knot.

(E) Taming the 1098

Norman Cantrell, RPT, Central Oklahoma Chapter

The Steinway 1098 or Model 45 is a challenge to many technicians. There are several versions of this piano as design changes have been implemented over the years. Norman has been servicing the pianos at Oklahoma City University since 2006 with 83 of these in their inventory. He’s learned a few things to make them play and perform better without losing his sanity along the way. Come learn a few tested tricks to make servicing this model easier and more rewarding.


(E) A Dead Simple Method for Pure 12ths Tuning

David Andersen, Los Angeles, CA Chapter

Pure 12ths tuning has fascinated our craft for the past several years. This class ends the confusion and lack of a workable, simple protocol to achieve a stable, musical, singing Pure 12ths temperament and tuning. Radically improve your ability to make tuning the actual "crown jewel" of your work. Half the class is tuning; the other half is breaking it all down and answering all questions. Clear handouts will explain it all. Be good to yourself; get a lot better after this class.

(E) Five More Masters

David Andersen, Debbie Cyr, RPT, Eric Johnson, RPT, Robin Olson, RPT & RandiSue Potter, RPT

Moderator Matt Hirschfelder will take us on a journey with some of PTG's most experienced RPT’s as they reveal their tips for a great tuning, and demonstrate their hammer techniques on grand and upright pianos. All gifted teachers, they also share a serious commitment to passing on their knowledge to others. Compare their techniques and learn to improve your own. A popular class in Lancaster, it's back by popular demand.

(E) Fundamentals of Piano Tuning

Don Mannino, RPT, Kawai

This class is a “bottom to top” lecture and demonstration of the many aspects of piano tuning. Discussed are fundamental physics of musical sounds, the harmonic series, the source of the beats we hear, an aural temperament sequence, octave tuning methods and styles, unison tuning, and tuning stability. Although the class is intended for relative newcomers, it has materials useful to all technicians.

(I) Making the Transition: Moving from ETD to Tuning Test

Eric Johnson, RPT, Connecticut Chapter

Interested in becoming an RPT? Join us as we explore techniques for using the ETD to prepare for taking the PTG Tuning Exam.

(E) Techniques for Passing Part 1 of the PTG Tuning Exam

Bill Bremmer, RPT, Madison, WI Chapter

The focus will be exclusively on the techniques required to pass Part 1 of the PTG Tuning Exam.  For the exam, you will be required to set pitch from either a tuning fork or an aural electronic source. The benefits and perils of each will be explored. There will be four temperament tuning sequences demonstrated: a traditional fourths and fifths sequence and three sequences that begin with a chain of contiguous major thirds.

(E) Tuning Fundamentals: The Old and The New

RandiSue Potter, RPT, ARPT, Portland, OR Chapter

Techniques — how we sit, stand, manipulate our hammer, use various types of mutes, strike, and caress the key — are as important a part of our Tool Kit as are the hammers and mutes themselves. Beginners will learn to use Smart Techniques to be efficient and effective from the start, alleviating stress in their hands and back, while making their tunings more stable. Advanced tuners will say "I wish I had known that 20 (or 30 or 40) years ago."

(E) Tuning Pneumatic Players and Basic Troubleshooting

Douglas Laing, RPT, Southwest Florida Chapter

Don't know how to tune a player piano with all that stuff in the way? Find out how to clear a path to the tuning pins. Learn how to earn some extra cash by performing basic player maintenance (cleaning and lubrication). You will also learn how to be a superhero by fixing the most common problems you will run across.

(E) Tuning Tutoring

Taylor Mackinnon, RPT, Portland, OR Chapter

There’s no better way to improve your tuning than one-on-one tutoring by a master tuner. Private tutoring will benefit you no matter what your skill level. With outstanding tuning tutors, you’ll find a universe of tuning knowledge to explore. This all takes place in a one-on-one format lasting 90 minutes. Limit of 9 Slots. Fee: $120. You must pre-register for this class by calling (913) 432-9975.

(I, A) The Venue, the Artist, and Then the Piano

Ed Tomlinson, RPT, Los Angeles, CA Chapter

Learn how to better work with concert venues as well as how to best serve the concert artist’s needs... and then how to prepare a concert piano with limited time.


(E) The Accu-Tuner Tuning Class

Robert Conrad, RPT, Inventronics

Learn how to use the newest AccuTuner IV "980" features to customize an FAC template. Find out how to alter the tenor partial change location and correct all partial changes. We’ll also talk about how to determine the amount of custom stretch needed, and how to apply those amounts to the midrange, bass, and treble tuning.

(E) CyberTuner - Tuning Your Way

Dean Reyburn, RPT & Carl Lieberman, RPT, Reyburn CyberTuner

CyberTuner can be optimized to repeat your tuning style, pitch raise style, and adapt to how you tune pianos. We will be covering iRCT's Smart Pure 12ths tuning style, and how to both tune and pitch raise quickly and accurately in a single pass.

(E) Tuning with the Verituner

Dave Carpenter, RPT, Veritune, Inc.

See up close how to take advantage of the unique tuning features of Verituner for iPhone and Verituner for Android. We will cover pitch raises, fine-tuning, setting standard pitch, temperament, stretch styles, and saving tunings. Learn the best practices for getting a great sounding tuning on any piano with the fewest steps.


(I) From Rocks to Creampuffs

Don Mannino, RPT, Kawai

This is a basics of voicing class, in which samples of four different sets of hammers are installed in one Kawai grand piano, and each is voiced during the class for the best tone. The hammer manufacturing process and concepts of how hammers work are discussed. The goal of the class is to show how to work up soft hammers, how to bring down hard hammers, and most importantly to take the fear out of the voicing process.

(A) Shigeru Kawai Concert Preparation

Don Mannino, RPT, Kawai 

Demonstration and discussion of Kawai EX concert piano preparation and voicing.  The full process of piano preparation will be covered, including string voicing, refining action performance to meet specific pianist’s needs, plus hammer voicing techniques which build sustain, power and clarity. This is an advanced class, with knowledge of basic voicing and regulation techniques being a prerequisite.

(E) Tuning Tools, Techniques, and Tricks

Charles Faulk, RPT, Faulk Tuning Hammers

Learn more about "rigidity" in tuning hammers. Following this, Charles will cover a list of tuning techniques to help you achieve more accuracy with the least effort. He'll also talk about a fast voicing technique to soften those rock-hard hammers. And, if time permits, he may ask a few brave souls to demonstrate their tuning techniques ... with maybe a little tactful coaching.

(E) Voicing: A Part of Everyday Service

Ryan Sowers, RPT, Puget Sound, WA Chapter

Voicing, like unisons, should be learned from the beginning and mastered over a lifetime. This class will help you develop systems to upgrade the tone of everyday pianos using novel tools and techniques. Whether a Steinway B or Wurlitzer spinet, your clients will find new joy in their instruments.



(E) Take the RPT Written Examination
Exam Team
This is your opportunity to take the RPT Written Exam. Examinees should come to the room indicated on the schedule. Visually impaired technicians will take their exams in the ETSC office. You must bring your current PTG membership card with you to take the exam. No extra fee required to take this exam. For PTG members only.


Understanding the PTG Tuning Exam
Exam Team
Exam candidates will gain an insight of what they will be expected to know, how the exams will be administered and scored, what exam preparation materials are available and where they can be found. They will then know what they will need to do to be prepared to take the exams. For PTG members only.


Understanding the PTG Technical Exam
Exam Team
We will walk through the Technical Exam and its requirements. There will be examples of exam equipment, models, and jigs such as one would find on the test, including a preview of the new 3-note grand model which will be implemented in the near future. Come find out how to prepare for the exam, what tools and supplies you will need to bring to the exam site, and what examinees are entitled to before, during, and after the examination. Learn ways to best utilize your time, improve efficiency, and cope with exam anxiety and other strategies to help you successfully tackle the exam and become a part of your daily fieldwork. There will be plenty of time for Q&A. For PTG members only.


CTE Tuning Examiner Training
Exam Team
This class is for both seasoned CTE examiners as well as RPT members who want to find out how to become a Certified Tuning Examiner. We’ll discuss tips for giving a good exam and possible pitfalls. Any and all CTE examiners who are attending the convention should attend and learn from each other on how to improve their testing skills. For RPT’s only.
Technical Examiner Training
Exam Team
The supervising examiner on a Technical Exam must be certified as a Technical Examiner, Certified (TEC) in order for the exam to be valid. We’ll discuss the certification requirements, demonstrate exam equipment, analyze the skills and attitudes required of a competent examiner, and talk about common exam problems and issues. All RPTs with an interest in Technical testing, TECs with questions, TEC trainees, and RPTs just thinking about getting involved in testing are invited to attend. For RPT's only.