Pianotech

          I am close to finishing a rebuild job on an old 1897 Mason and Hamlin Screwstringer. I have around 175 hours of work into this project and am finally close to being finished, but today I was tightening up a string and the hook that the string attaches to at the tuning end of the string snapped in two. The hook I need is a treble hook that goes on the back row. I actually need two of them since there was already one missing on the top note. I sure hope someone has such an instrument that can be used for spare parts. Otherwise I'm Screwstringered!

              - Russell Schmidt R,P,T  

I have plenty for you, Russell.  Please contact me offline.

Chris Storch
(617) 489-6436
chrisstor@aol.com

          I am close to finishing a rebuild job on an old 1897 Mason and Hamlin Screwstringer. I have around 175 hours of work into this project and am finally close to being finished, but today I was tightening up a string and the hook that the string attaches to at the tuning end of the string snapped in two. The hook I need is a treble hook that goes on the back row. I actually need two of them since there was already one missing on the top note. I sure hope someone has such an instrument that can be used for spare parts. Otherwise I'm Screwstringered!

              - Russell Schmidt R,P,T  

Chris,

So you're hoarding screwstringer parts down there... 🤔 

Peter Grey Piano Doctor 

I have plenty for you, Russell.  Please contact me offline.

Chris Storch
(617) 489-6436
chrisstor@aol.com

          I am close to finishing a rebuild job on an old 1897 Mason and Hamlin Screwstringer. I have around 175 hours of work into this project and am finally close to being finished, but today I was tightening up a string and the hook that the string attaches to at the tuning end of the string snapped in two. The hook I need is a treble hook that goes on the back row. I actually need two of them since there was already one missing on the top note. I sure hope someone has such an instrument that can be used for spare parts. Otherwise I'm Screwstringered!

              - Russell Schmidt R,P,T  

I work with a machinist who may be manufacturing new screw stringer parts in the future. He's not a technician, but he collects Victorian era pianos and has the equipment to make nearly anything.

Chris,

So you're hoarding screwstringer parts down there... 🤔 

Peter Grey Piano Doctor 

I have plenty for you, Russell.  Please contact me offline.

Chris Storch
(617) 489-6436
chrisstor@aol.com

          I am close to finishing a rebuild job on an old 1897 Mason and Hamlin Screwstringer. I have around 175 hours of work into this project and am finally close to being finished, but today I was tightening up a string and the hook that the string attaches to at the tuning end of the string snapped in two. The hook I need is a treble hook that goes on the back row. I actually need two of them since there was already one missing on the top note. I sure hope someone has such an instrument that can be used for spare parts. Otherwise I'm Screwstringered!

              - Russell Schmidt R,P,T  

I work with a machinist who may be manufacturing new screw stringer parts in the future. He's not a technician, but he collects Victorian era pianos and has the equipment to make nearly anything.

Chris,

So you're hoarding screwstringer parts down there... 🤔 

Peter Grey Piano Doctor 

I have plenty for you, Russell.  Please contact me offline.

Chris Storch
(617) 489-6436
chrisstor@aol.com

          I am close to finishing a rebuild job on an old 1897 Mason and Hamlin Screwstringer. I have around 175 hours of work into this project and am finally close to being finished, but today I was tightening up a string and the hook that the string attaches to at the tuning end of the string snapped in two. The hook I need is a treble hook that goes on the back row. I actually need two of them since there was already one missing on the top note. I sure hope someone has such an instrument that can be used for spare parts. Otherwise I'm Screwstringered!

              - Russell Schmidt R,P,T  

I work with a machinist who may be manufacturing new screw stringer parts in the future. He's not a technician, but he collects Victorian era pianos and has the equipment to make nearly anything.

Chris,

So you're hoarding screwstringer parts down there... 🤔 

Peter Grey Piano Doctor 

I have plenty for you, Russell.  Please contact me offline.

Chris Storch
(617) 489-6436
chrisstor@aol.com

          I am close to finishing a rebuild job on an old 1897 Mason and Hamlin Screwstringer. I have around 175 hours of work into this project and am finally close to being finished, but today I was tightening up a string and the hook that the string attaches to at the tuning end of the string snapped in two. The hook I need is a treble hook that goes on the back row. I actually need two of them since there was already one missing on the top note. I sure hope someone has such an instrument that can be used for spare parts. Otherwise I'm Screwstringered!

              - Russell Schmidt R,P,T  

Chris,

So you're hoarding screwstringer parts down there... 🤔 

Peter Grey Piano Doctor 

I have plenty for you, Russell.  Please contact me offline.

Chris Storch
(617) 489-6436
chrisstor@aol.com

          I am close to finishing a rebuild job on an old 1897 Mason and Hamlin Screwstringer. I have around 175 hours of work into this project and am finally close to being finished, but today I was tightening up a string and the hook that the string attaches to at the tuning end of the string snapped in two. The hook I need is a treble hook that goes on the back row. I actually need two of them since there was already one missing on the top note. I sure hope someone has such an instrument that can be used for spare parts. Otherwise I'm Screwstringered!

              - Russell Schmidt R,P,T  

Chris,

So you're hoarding screwstringer parts down there... 🤔 

Peter Grey Piano Doctor 

I have plenty for you, Russell.  Please contact me offline.

Chris Storch
(617) 489-6436
chrisstor@aol.com

          I am close to finishing a rebuild job on an old 1897 Mason and Hamlin Screwstringer. I have around 175 hours of work into this project and am finally close to being finished, but today I was tightening up a string and the hook that the string attaches to at the tuning end of the string snapped in two. The hook I need is a treble hook that goes on the back row. I actually need two of them since there was already one missing on the top note. I sure hope someone has such an instrument that can be used for spare parts. Otherwise I'm Screwstringered!

              - Russell Schmidt R,P,T  

I wouldn't say I'm hoarding.  I'm lovingly conserving lots and lots and lots of spare parts for screwstringers.  :)

C-

Chris,

So you're hoarding screwstringer parts down there... 🤔 

Peter Grey Piano Doctor 

I have plenty for you, Russell.  Please contact me offline.

Chris Storch
(617) 489-6436
chrisstor@aol.com

          I am close to finishing a rebuild job on an old 1897 Mason and Hamlin Screwstringer. I have around 175 hours of work into this project and am finally close to being finished, but today I was tightening up a string and the hook that the string attaches to at the tuning end of the string snapped in two. The hook I need is a treble hook that goes on the back row. I actually need two of them since there was already one missing on the top note. I sure hope someone has such an instrument that can be used for spare parts. Otherwise I'm Screwstringered!

              - Russell Schmidt R,P,T  

"Conservationist" 😉 

Peter Grey Piano Doctor 

I wouldn't say I'm hoarding.  I'm lovingly conserving lots and lots and lots of spare parts for screwstringers.  :)

C-

Chris,

So you're hoarding screwstringer parts down there... 🤔 

Peter Grey Piano Doctor 

I have plenty for you, Russell.  Please contact me offline.

Chris Storch
(617) 489-6436
chrisstor@aol.com

          I am close to finishing a rebuild job on an old 1897 Mason and Hamlin Screwstringer. I have around 175 hours of work into this project and am finally close to being finished, but today I was tightening up a string and the hook that the string attaches to at the tuning end of the string snapped in two. The hook I need is a treble hook that goes on the back row. I actually need two of them since there was already one missing on the top note. I sure hope someone has such an instrument that can be used for spare parts. Otherwise I'm Screwstringered!

              - Russell Schmidt R,P,T